How to Match Drilling Tools — Kelly Bar, Auger, Bit and Mud Pump — to Your Rig?
Matching drilling tools to a rotary rig means sizing the kelly bar to the torque class, the auger/bucket to the bore diameter, the bit to the ground, and the mud pump to the slurry volume. Wrong pairing wastes power and breaks tooling. Indicative tooling kits run USD 12,000–45,000 EXW China.
Which Kelly Bar Fits Your Rig Class?
Kelly bars come in friction and interlocking (locking) types; the torque class decides the section count and length. Match the bar to the rig, not the other way round.
| Configuration | Fits rig class | Type / sections | Length | Indicative price (EXW) |
|---|---|---|---|---|
| XCMG XR-series friction kelly | 30–80 m rotary | Friction / 4×15 m | 60 m | US$ 15,000–19,000 |
| SANY SR-series friction kelly | 35–85 m rotary | Friction / 4×15 m | 60 m | US$ 16,000–21,000 |
| Zoomlion ZR-series friction kelly | 30–70 m rotary | Friction / 4×13 m | 52 m | US$ 14,000–18,000 |
| Sunward SWDM-series kelly | 35–85 m rotary | Friction / 4×15 m | 60 m | US$ 16,000–21,000 |
How to Choose Auger, Bucket and Bit by Ground?
- Soft clay / silt: continuous-flight auger, then a clean-out bucket.
- Sand / gravel: straight bucket with teeth; add a casing oscillator for collapse risk.
- Hard clay / weathered rock: rock bucket with bullet teeth.
- Boulders / bedrock: core barrel or pre-breaking before the bucket.
- Mud method: a bottom-discharge bucket paired with the slurry system.

How to Size the Mud Pump and Slurry System?
The mud pump must move enough slurry to lift cuttings at your bore diameter. A 3PNL-class pump (≈22 kW) suits 1.0–1.5 m bores; larger diameters need higher flow. Size the pump to the planned hole, not the rig's maximum, to avoid overflow and poor returns.
Pre-Order Checklist
- Match kelly-bar type and length to the rig's torque class.
- Size the auger/bucket to the largest planned bore diameter.
- Pick the bit type from the geotech soil profile.
- Confirm mud-pump flow against the largest bore.
- Ask for the tooling list and photos before you pay.
- Budget spares: teeth, cutters, seals and a spare rope.
How We Matched These Kits
We paired each kelly bar to the rig class it is listed with and cross-checked auger/bucket sizes against the bore range. Tooling brands such as Epiroc and Sandvik set the industry reference for bits and DTH hammers; we size our kits to the same interfaces.

Which Rigs We Recommend With Tooling (3–5 Units)
The rigs below are listed with a standard tooling set; prices are indicative EXW China. Live units and firm quotes: FairTradeMachinery rig inventory.
| Model | Bore range | Tooling included | Year / hours | Indicative price (EXW) |
|---|---|---|---|---|
| XCMG XR280D | up to 2.5 m | auger + bucket | 2019 / 3,600 h | US$ 118,000–145,000 |
| SANY SR285 | up to 2.5 m | auger + bucket | 2020 / 3,100 h | US$ 120,000–150,000 |
| Zoomlion ZR220A | up to 2.0 m | auger + bucket | 2018 / 4,100 h | US$ 86,000–108,000 |
| Sunward SWDM280 | up to 2.5 m | auger + bucket | 2019 / 3,500 h | US$ 110,000–138,000 |
FAQ
Friction or interlocking kelly bar?
Friction bars suit most bored-pile work and deeper settings; interlocking bars give higher crowd force for hard stratum. Match to your ground.
Do I need a mud pump for every job?
For stable soil with a clean-out bucket, no. For slurry-wall or collapse-risk bores, the pump is essential.
Are Epiroc or Sandvik bits compatible?
They set the reference interfaces; many aftermarket bits share the same conical tooth holders — confirm the holder type before ordering.
Is tooling included in the rig price?
A standard set is included unless stated; casing and special bits are optional and quoted separately.
Can I buy tooling without a rig?
Yes — kelly bars and tooling are available separately; contact us for the interface check.
Sources

- Epiroc — drilling tools and DTH/top-hammer consumables: https://www.epiroc.com
- Sandvik — rock drilling tools and bits: https://www.sandvik.com
- XCMG global — rotary drilling rig and tooling specifications: https://www.xcmg.com
- FairTradeMachinery — used drill rig inventory (live models & specs): /rigs.html Published: 2026-11-16 · Last reviewed: 2026-11-16 ·
- By Author: 【Pace 】Equipment Inspector, FairTradeMachinery







FAQs
WhatsApp